Payment & Shipping Terms:
|Light Transmission:||＞89%||Surface Tension:||≥ 36dyn/cm|
|Surface Texture:||Polish/Polish||Specific Gravity:||1.2g/cm3|
|Vicat Softening Temperature:||148℃|
high light transmission polycarbonate rolls,
polish surface polycarbonate film,
Polish Surface Clear Polycarbonate Film
PC film is short for Polycarbonate film. It is an amorphous, odorless, non-toxic, highly transparent colorless or slightly yellow thermoplastic engineering plastic.
PC film is a type of engineering plastic with the super impact resistance. Even if it’s in -40℃ environment, the impact resistance is as well as in normal temperature.
PC film with flame resistance is widely applied in applied in appliance, automobile, electronics, aviation, luggage etc.Besides, The level of flame resistance is 94 V-2 and V-0.
With good weather resistance, widely used outdoor and lamps, office furniture, car lamps and so on.
The electrical property of pc film always keeps in steady in wide range of temperature, which can be used as a kind of insulation material.
Typical Property Values
|Specific Gravity||ISO 1183||——||G/cm3||1.2|
|Light Transmission||ASTM D1003||——||%||>89|
|Water Absorption Equilibrium||ASTM D570||24 Hours||%||0.35|
|Vicat Softening Temperature||ISO306||℃||148|
|Gaute Variation||>0.5mm ±3%|
Note: The above figures are typical values obtained under standard methods and should not be construed as unsteady application conditions.
Widely used in such as: the hat, sunglass, windows, aviation sheet, lighting, electroplating, vacuum forming, dyeing, etc.
Contact Person: keron.Tang